Step 14: Now, launch “ Safari” and check if it is working or not. Step 12: To save all the changes you have made to tap “ Apply”. Step 10: And “ MTU” to “ Custom” and enter “ 1453” below in the section. Step 9: Then, open the “Hardware” panel and set “ Configure” to “ Manually”. Step 8: Now tap on the “ DNS” panel and then click on the “ (+)” symbol and enter “8.8.8.8” and “8.8.4.4”. Step 7: Now click on “ TCP/IP” and then click on “ Renew DHCP Lease”. Step 5: Pull down the “ Network Name” panel and select the Wi-Fi network to join. Step 4: Next, Tap on the “ (+)” sign and give some identifiable name that suits you. Step 3: Now, on the top, you will find the “Location” panel, drop down and select “Edit Locations”. Step 2: Open “ Network” and then select “ Wi-Fi”. Step 1: Open “ System Preferences”, from the Apple Menu. and Remove WiFi Profile completely and Re-add, Enable WiFi. Note: For MacOS Ventura, Follow the Solution 5 given steps. Solution 6: Create a new custom network location Similarly, unplug the power adapter of the Wi-Fi router and plug it back in. Press the power button on the Mac and after a while boot it. Up next is to reboot the Mac and Wi-Fi router to rule out the problems that lie between them. Click Advanced and then select the Wi-Fi network.Īfter doing this, I’d recommend you to restart the Mac before reconnecting to the Wi-Fi network.Click on the Apple logo on the top menu bar. if your Mac running on macOS Monterey & Earlier.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |